I'm curious why they don't fully load it, I can speculate:

0) starship is still in testing, they don't want to change too many variables from flight 14 and add 50t of payload.

1) lower payload gives them more options in engine-out situations. On flight 14, both booster and ship had engines fail.

2) derisking for ship failure, each Starlink sat costs ~$1.2m, and losing $30m of satellites hits less hard than $60m if orbital insertion fails.

3) the dispenser installed on ship 42 only fits 26 sats, and increasing this would require a hardware modification and possible delays.

4) Starlink v3 manufacturing is delayed and they don't have enough units, which I find doubtful given Starship is years late and they should have a backlog of v3s waiting to launch.

5) block 3 has worse performance than expected and can't reliably deliver 100t to orbit. Recent comments that raptor 3 can only reliably deliver 230t of thrust instead of 280t support this. This should be resolved by block 4 or 5 with raptor 4.

November 13, 2026 18:45 - 20:00 AT Starship Flight 15 Flight 15 of Starship is preparing to launch as soon as Friday, November 13, pending regulatory approval. The 75-minute launch window will open at 4:45 p.m. CT.

A live webcast of the flight will begin about 30 minutes before liftoff, which you can watch here and on X @SpaceX. Coverage is planned to continue through ship catch, with the potential for hours of live views from Starship as it orbits Earth, powered by Starlink. As is the case with all launches, the schedule is dynamic and likely to change, so be sure to check in here and stay tuned to our X account for updates.

The upcoming flight is planned to be the first to return both Starship and Super Heavy to the launch site for catch. If successful, this will mark the first full recovery of an orbital launch system and a breakthrough moment in making Starship a reliable, rapidly reusable rocket.

Starship’s initial return to launch site mission is expected to orbit the Earth at an altitude of ~275 km and complete approximately 14 orbits around the planet over the course of a more than 22-hour flight. Similar to Starship’s first orbital mission, the flight profile has been designed with the opportunity to insert into a passively safe suborbital trajectory or safely deorbit at multiple pre-determined areas over the ocean after raising to an orbital altitude. Read more about the testing, mission design, and safety measures for first planned Starship catch.

Starship’s previous mission was the culmination of more than a dozen flight tests and years of development, sending Starship to orbit and deploying meaningful payloads to space for the first time. Watch “Go For Orbit”, the latest episode in the ongoing Starship series experience the moments behind flying the most ambitious Starship mission yet.

The booster’s primary objective on Flight 15 will be executing a successful launch, ascent, stage separation, boostback burn, and return to the launch site for catch. This will be the first return and catch attempt for a Super Heavy V3 booster. Three V1 boosters were successfully caught on earlier flight tests with two demonstrating successful reflights.

The Starship upper stage’s primary objectives include the deployment of 26 Starlink V3 satellites and the first return to launch site and catch at Starbase. Starship will only execute a return to launch site if the flight control team has ensured that the vehicle systems critical for reentry maneuvers and final landing burn and tower approach are healthy.

Starship will deliver 26 Starlink V3 satellites to orbit, which aim to greatly expand the network's capacity and user speeds. Each Starlink V3 satellite will add 1 Terabit of capacity to the constellation, with all 26 satellites equaling ~10 Starlink V2 Mini launches on Falcon 9.

After deploying from Starship, the Starlink V3 satellites will unfold their antennas and deploy their solar arrays and make initial contact with the ground and the rest of the Starlink constellation via radio frequency and laser links. The satellites will then begin raising their orbits with their onboard thrusters. Following their on-orbit checkouts, the satellites should begin serving customers as soon as a few weeks after launch.

Three of the satellites have been modified with a suite of cameras to scan Starship’s heatshield and transmit imagery down to operators. This method of analyzing Starship’s heatshield has been tested on previous flights and is one of several data sources to help inform Starship’s readiness to return to the launch site on Flight 15.

Starship’s heatshield will incorporate the improvements made on Flight 14 including additional retention mechanisms on tiles in areas deemed to be at highest risk of falling off during ascent and addressing areas with a flow path for plasma to get behind the tiles. The vehicle will also have a large portion of the heatshield equipped with a curved tile design that has shown the ability to reduce heating in the gaps between tiles.

Countdown All Times Approximate

00:50:00 SpaceX Flight Director conducts poll and verifies GO for propellant load 00:35:33 Booster LOX (liquid oxygen) load underway 00:35:30 Booster fuel (liquid methane) load underway 00:35:12 Ship LOX load underway 00:35:11 Ship fuel load underway 00:21:40 Raptor begins engine chill on booster and ship 00:02:50 Booster propellant load complete 00:02:10 Ship propellant load complete 00:00:30 SpaceX flight director verifies GO for launch 00:00:17 Flame diverter activation 00:00:03 Booster engine startup command 00:00:00 Excitement guaranteed

FLIGHT TIMELINE All Times Approximate

00:00:00 Liftoff 00:00:58 Max Q (moment of peak aerodynamic stress on the rocket) 00:02:19 Super Heavy MECO (most engines cut off) 00:02:21 Hot-staging (Starship Raptor ignition and stage separation) 00:02:26 Super Heavy boostback burn start 00:03:02 Super Heavy boostback burn shutdown 00:06:10 Super Heavy landing burn start 00:06:35 Super Heavy landing burn shutdown and catch 00:08:09 Starship engine cutoff 00:26:10 Starship orbital insertion burn start 00:26:30 Starship orbital insertion burn shutdown 00:35:01 Payload deploy start 01:17:40 Payload deploy complete 01:27:46 Early Hawaii Return Check 07:15:35 Mid Chile Return Check 20:41:55 Final Hawaii Return Check 21:35:57 Deorbit burn start 21:36:07 Deorbit burn shutdown 22:10:46 Starship entry 22:29:34 Starship is transonic 22:30:13 Starship is subsonic 22:32:16 Landing burn start 22:32:18 Landing flip 22:32:26 Landing burn 3 to 2 engines 22:32:33 Landing burn 2 to 1 engine 22:32:34 Starship landing burn shutdown and catch