Can it kill you? no probably not. The tension limit kicks in and lets the line out if you pull too hard.
Will it work in a room with a ceiling fan? usually its fine since you can lower the work area ceiling to exclude the fan.
Will it make my kids learn to not pick up after themselves? They never will anyways.
There is an undeniable allure to the idea of a bipedal chassis realizing I'm an inefficient drain on corporate resources, then stabbing me to death while I sleep due to a minor Terms of Service violation.
The xiaomi-robotics-1 concept is but one that seems very doable and very near term.
We built the world for us, not for the most sensible robot.
So for generalized solutions, a good biped will have some advantages.
Based on what? Do you think humans evolved into what we are based purely on aesthetic? Of course it may be suboptimal, but given enough time and ingenuity, so could literally everything be. Not sure that should stop anyone.
Reminds me of the engineer who accidentally strangled himself with his contraption:
> He devised an elaborate system of ropes and pulleys to help others lift him from bed. He became entangled in the ropes and died of strangulation at the age of 55. However, he is better known for two of his other inventions: the tetraethyl lead (TEL) additive to gasoline, and chlorofluorocarbons (CFCs). - "The Man Who Accidentally Poisoned the Planet Twice": https://en.wikipedia.org/wiki/Thomas_Midgley_Jr.
"Grunthos was reported to have been "disappointed" by the poem's reception, and was about to embark on a reading of his 12-book epic entitled "My Favourite Bathtime Gurgles" when his own major intestine, in a desperate attempt to save humanity, leapt straight up through his neck and throttled his brain. "
Given abliterated open models, Stringman is coming for our last remaining job!
Rarely does a product announcement make me laugh out loud :)
Robot picks up clothes -> this is stupid
Robot picks up kids toys -> this is brilliant
In reality though, I think the cables will never work in a household situation. It's a interesting concept and I'm sure it was fun to build :) Makes me wonder what commercial application this would work for, I'm sure there's something out there that would benefit from this over waiting on humanoid tech
I guess in most industrial use cases it makes more sense to have a robot stationary and move the parts around with conveyors. Doing it that way allows to pipeline and parallelize the manufacturing process. In contrast the large operating volume covered by cable robot needs to be served by single robot exclusively.
I wonder how it would handle something like a blanket or pillow on top of the toys
Robot can't open ikea drawers -> this is not gonna work
Reminded me of the Hangprinter https://github.com/tobbelobb/hangprinter which has been around for around for long time... always wanted to build one.
basically a cable driven 4x8 sheet router.
Anyone?
I suspect the reason they chose 4 is that 3 cables would limit you to a triangular region, so you’d only be able to access half the room.
Probably if you went this way, you'd want to measure each ceiling cable so it is about X+Y length, or otherwise the slack needs to be held somewhere.
This is one less actuator than their system if I understand them, and they are not counting the gripper itself.
$800 is already super cheap, and the openness makes it likely you could implement even cheaper options yourself.
Would more taut crossed wires and a descending line for the grabber (like the one at an arcade) solve the humans crossing wire path problem? Then it becomes separate x/y and z.
I think the form factor is actually fine but the specs probably need a boost.
They say they use 4 actuators, but if they only used 3, this problem would be solved.
Instead of independently controlling all four lines, you can join the lines leaving each corner unit and then just move the line left or right instead of reeling two different lines in and out. You still use the corner eye loops, and you use two cables that are X+Y in length. This allows you to pick a point on the ceiling. Then a third actuator and line in the gripper itself could lower itself to the floor.
EDIT: maybe lower it on three lines instead of one?
Rigid objects would result in the gripper twisting, but the current design could offset some of that by pulling harder in one direction?
Their example of it being used to move items between robotics stations in an automated workshop seems far more widely-applicable than the in-home solution, which I imagine is primarily aimed at assisting people with physical disabilities rather than those of us who can easily bend down and pick things up without pain or exhaustion.
I built a big swing arm in my dorm, so I had two 40lb+ 21" CRT dangling free under some pulleys. Keyboard mouse space below. Then myself on a hammock chair, also swinging. Just a couple pieces of 2x4 reinforced with some angle iron, some door hinges, some cables & pulleys. It was really fun.
I've dreamed of having just a good 2d robot that can, like, hold a camera and pan. I saw Stringman here a couple of weeks ago & it's been hard to not thing about it! I don't own though, so, seems unlikely I'd commit, as alas the walls are not a simple white I can easily patch & paint. But so cool!
My fear is that a company that has the money to build and manufacture this will rip off the idea and use their resources to polish the concept. With a lot polish, this type of thing can be useful in certain environments.