It wouldn't be surprising if the RP2350 gets officially certified to run at something above the max supported clock at launch (150MHz), though obviously nothing close to 800MHz. That happened to the RP2040[1], which at launch nominally supported 133MHz but now it's up to 200MHz (the SDK still defaults to 125MHz for compatibility, but getting 200MHz is as simple as toggling a config flag[2]).

[1] https://www.tomshardware.com/raspberry-pi/the-raspberry-pi-p...

[2] https://github.com/raspberrypi/pico-sdk/releases/tag/2.1.1

Here is an idea for a CPU designer...

Observe that you can get way more performance (increased clock speed) or more performance per watt (lower core voltage) if you are happy to lose reliability.

Also observe that many CPU's do superscalar out of order execution, which requires having the ability to backtrack, and this is normally implemented with a queue and a 'commit' phase.

Finally, observe that verifying this commit queue is a fully parallel operation, and therefore can be checked slower and in a more power efficient way.

So, here's the idea. You run a blazing fast superscalar CPU, well past the safe clock speed limits that makes hundreds of computation or flow control mistakes per second. You have slow but parallel verification circuitry to verify the execution trace. Whenever a mistake is made, you put a pipeline bubble in the main CPU, clear the commit queue, you put in the correct result from the verification system, and continue - just like you would with a branch misprediction.

This happening a few hundred times per second will have a negligible impact on performance. (consider 100 cycles 'reset' penalty, 100*100 is a tiny fraction of 4Ghz)

The main fast CPU could also make deliberate mistakes - for example assuming floats aren't NaN, assuming division won't be by zero, etc. Trimming off rarely used logic makes the core smaller, making it easier to make it even faster or more power efficient (since wire length determines power consumption per bit).

I recently turned turbo off on a small, lightly loaded Intel server. This reduced power by about a factor of 2, core temperature by 30-40C, and allowed running the fans much quieter. I’m baffled as to why the CPU didn’t do this on its own. (Apple gets these details right. Intel, not so much.)

I bet if you designed a custom board it could do a little better

Credit where it's due: Mike is a wizard. He's been involved in some of our more adventurous tinkering, and his input on the more complex areas of our product software has been invaluable. Check out his GitHub for some really interesting projects: https://github.com/MichaelBell

Blatant plug: We have a wide range of boards based on the RP2350 for all sorts of projects! https://shop.pimoroni.com/collections/pico :-)

They're unstable enough at stock if taken outside an air conditioned room.